Newport-brass 26-27 User Manual download pdf

2001 CARNEGIE AVE

SANTA ANA, CA 92705

www.newportbrass.com

Open Towel Ring, Double Garment Hook,

Single Post & Reserve Tissue Holder

Installation Instructions

Model No.

26-10, 26-13, 26-27, 26-30

Recommended Installation by a Professional Contractor

1. Hold the BASE (1) up to desired location and mark the hole locations on flange.

2. Drill holes in wall at points marked using the appropriate drill size:

· Wood Screw (#6 x 2”) - use: 3/32" Drill

· Toggle Screw (6-32 x 3”) - use: 3/8" Drill

3. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2). Align BASE (1) so that

upper flat is level. (See Fig. 1)

4.Thread ADAPTER (3) onto BASE (1). Insert POST (4) into ADAPTER (3). Position POST (4)

height to 2 1/8” from mounting surface and secure in place by tightening the

SETSCREW (5). (See Fig. 2)

5. Place ESCUTCHEON (6) over wall mounted POST (4). (See Fig. 3)

5a. Open Towel Ring: Slide END POST (7) onto POST (4) and secure into place with

SETSCREW (5). (See Fig. 4)

5b. Double Garment Hook: Slide END POST (7) onto POST (4) and secure into

place with SETSCREW (5). (See Fig. 5)

5c. Single Post Tissue Holder: Slide END POST (7) onto POST (4) and secure into

place with SETSCREW (5). (See Fig. 6)

5d. Reserve Tissue Holder: Slide END POST (7) onto POST (4) and secure into

place with SETSCREW (5). (See Fig. 7)

Fig. 1

Fig. 3

Fig. 4

Fig. 2

Fig. 5

Fig. 6

Fig. 7

2 1/16”

1 2

No comments

Newport-brass 26-27 User Manual